Paradyne Hotwire ATM Line Cards 8385 - Manual (Page 19)

2. Menus and Screens
8335-A2-GB20-70 February 2003 2-5
User Login Screen (MCP)
You can log in to the Hotwire DSL system using either a local VT100-compatible
terminal or a remote Telnet connection. However, the Hotwire DSL system
accepts only one login session at a time.
The User Login screen appears if one or more users have been defined on the
Management Communications Processor (MCP).
Enter your login ID and password. The login ID and password are case-sensitive.
If you have RADIUS Authentication, this verification may take several minutes as
each RADIUS server is contacted one at a time.
If you are denied access during a Telnet session, the session stops and an error
is logged. If you are using a console, you are automatically returned to the User
Login screen.
NOTE:
If you forget your password, contact your Technical Service Center. Have the
serial number of the MCP card available, and the service representative will
provide you with a password.
After entering your login ID and password, the system displays the Hotwire
Chassis Main Menu.