Paradyne Hotwire ATM Line Cards 8385 User Manual
Page 69
4. Monitoring
8335-A2-GB20-70
February 2003
4-3
Table 4-1.
Monitoring – Card Options
Card Info Screen
B-A-A
Displays card information entered on the Card Info configuration screen and internal to the
card:
Card Name – The name assigned to the card.
Card Contact – Information about the person responsible for the card.
Card Location – The location of the system.
Card Up Time – Time elapsed (in days, hours, minutes, and seconds) since the card was
last powered up or reset.
Type – The type of card (DSL).
Model Number – The model number of card.
Serial Number – The serial number of card.
Firmware Revision – The firmware version number.
Hardware Revision – The hardware version number.
Line Code Revision – The digital signal processor code version number.
PLD Revision – The Programmable Logic Devices (PLD) code version number.
Specific PLD Revision (Models 8355 and 8385 only) – The Programmable Logic
Devices (PLD) code version number for additional devices on this card.
Time/Date Screen
B-A-B
Displays the line card’s time and date, which is maintained by the MCP. Time and date
can be changed from an MCP configuration screen. See the
Communications Controller (MCC) Card, IP Cons13.3((M)-9c-0. Re