Paradyne Hotwire ATM Line Cards 8385 - Manual (Page 7)

8335-A2-GB20-70 February 2003 v
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to set up, configure, and operate the
Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385, and is intended for
installers and operators.
New Features for This Document Release
This version of the Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385,
User’s Guide removes an appendix containing information about the Hotwire 6390
ReachDSL Modem. This information is now in the
Hotwire ReachDSL Modem,
Model 6390 with Inline Phone Filter, Installation and Operation Supplement ,
Document Number 6390-A2-GK40.
Document Summary
Section Description
Chapter 1, About the Hotwire
ATM Line Cards
Describes the card’s features and capabilities.
Chapter 2, Menus and Screens Provides instructions for accessing the user interface
and navigating the screens.
Chapter 3, Configuration Provides instructions for configuring the unit.
Chapter 4, Monitoring Describes how to use the LEDs, status messages, and
statistics to monitor the unit.
Chapter 5, Diagnostics Provides instructions for viewing self-test results and
alarms, and for running an ATM Ping and line loopback
test.
Chapter 6, Maintenance
Procedures
Provides instructions for clearing NVRAM, uploading or
downloading a configuration, downloading firmware,
and resetting the card.
Appendix A, Menus Shows the paths to configuration, monitoring, and
diagnostics screens.