Paradyne Hotwire ATM Line Cards 8385 - Manual (Page 25)

3. Configuration
8335-A2-GB20-70 February 2003 3-3
Procedure
To enter Card Information screen information:
1. Position the cursor in the field you wish to modify. Type the value you want and
press Enter.
2. Save the changes as prompted.
For . . . Enter . . .
Card Name Up to 16 alphanumeric characters to identify the card
(Default = blank).
Card Contact Up to 32 alphanumeric characters to identify the
person or organization responsible for the card
(Default = blank).
Card Location Up to 16 alphanumeric characters to identify the
location of the card (Default = blank).
ATM Segment Location
ID Up to 32 alphanumeric characters to identify the card for
F5 OAM segment loopbacks. If the card receives an
OAM loopback cell with a segment loopback destination
ID matching the value entered in this field, the card will
loop the cell back to the originator (Default = all ones).
Refer to ITU-T I.610 for required structure.