Panasonic AC Servo MINAS E Series IMC80A - Manual (Page 31)

185
[Reference]
Reference
Connector Kits for Power Supply of the Driver
(1) Part No. DV0P2870
(2) Components
(3) Pin arrangement of connector for CN x 1
(4) Recommended manual pressure bonding tool
(Customers are requested to provide it by
themselves.)
Name
Connector (10P)
Connector Pin
Manufacturer’s part No.
5557-10R-210
5556PBTL
Number
1
6
Manufacturer
Molex Incorporated
Remarks
For connector CN X1
(pin 10)
6
L3
1
E
7
(NC)
2
(NC)
8
L2
3
B
9
(NC)
4
(NC)
10
L1
5
P
<Cautions>
1. The above table shows arrangement of pins viewed from the pin inserting direction of the connector.
Also check pin Nos. carved on the main body of the connector so as to avoid incorrect wiring.
2. For wiring and connection, refer to “System Configuration and Wiring”, Wiring of Main Circuits (Page
27).
3. You should leave a pin labeled with (NC) unconnected.
Manufacturer’s part No.
57026-5000
57027-5000
Wire rod
UL1007
UL1015