Panasonic WV-NS324 - Manual (Page 20)

-20-
Connection type Item Parameter description
Connection type 3 IP address Enter the IP address assigned by your Internet service provider.
The setting is not required if your Internet service provider uses a
DHCP server (the DHCP server assigns an IP address to the
camera automatically).
Subnet mask Enter the Net mask assigned by your Internet service provider.
The setting is not required if your Internet service provider uses a
DHCP server (the DHCP server assigns an IP address to the
camera automatically).
Default gateway Enter the default gateway assigned by your Internet service
provider.
Host name Contact your Internet service provider and enter the assigned host
name if required.
Network speed Select the network speed by pressing the [ o ] button.
Selectable parameters: auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
(half duplex)
HTTP port Use the default setting "80" for the HTTP port.
DHCP Click ON if your Internet service provider uses a DHCP server
(DHCP server assigns an IP address to the camera automatical-
ly).
DNS Click ON when using the DNS server.
Primary DNS 0, 0. 0. 0
Secondary DNS Enter the IP address of DNS when using the DNS server.
Contact your Internet service provider for the IP address of the
DNS. Primary and secondary IP addresses can be set for the
DNS.
DDNS Click ON when using DDNS function.
Host name Ask your administrator
User name Ask your administrator
Password Ask your administrator
Access interval Ask your administrator
Connection type 4 IP address The setting differs depending on the setting of the router as fol-
lows:
If the router does not use DHCP: No setting required
If the router uses DHCP: The router needs to be assigned a pri-
vate IP address. This IP address must be different from the IP
addresses already assigned to the PC and other cameras.
For further information, refer to the operating instructions of the
router.
Net mask The setting differs depending on the setting of the router as fol-
lows:
If the router uses DHCP: No setting required
If the router does not use DHCP: Setting of the net mask is
required.
For further information, refer to the operating instructions of the
router.
Default gateway The setting differs depending on the setting of the router as fol-
lows:
If the router uses DHCP: No setting required
If the router does not use DHCP: The router needs to be assigned
a private IP address.
For further information, refer to the operating instructions of the
router.