Panasonic WV-NS324 - Manual (Page 23)

-23-
You can operate the camera in two ways: with the PC
by way of network, or with the Matrix Switcher system
controllers.
Access from the PC
Your PC can access the camera to view images, to
control and to set up menus.
Prior to operating from the PC, confirm that connections
are made properly as shown in CONNECTIONS on the
previous page.
1. Start up the PC.
2. Start up the Web browser, Internet Explorer or
Netscape Communicator.
3. Enter the IP address of the camera in the address
bar.
The factory default for the camera address is
192.168.0.10.
4. Press Enter on the keyboard.
5. The main window of the WV-NS324 camera will
appear on the display.
Note: Adobe Acrobat Reader should have been
installed on your PC to open the manual. Visit
the home pages of Adobe Systems Incorpo-
rated.
Camera Control
1. Click "Camera Control" in the Main Menu.
2. The authentication dialog appears.
The factory default is:
User Name : admin
Password: none
3. Click the [OK] button, then the "Camera Control"
window appears.
See pages 48 and 49 of User setup/Host setup for
more information if necessary.
Multi Screen Select
Click the [1-4] or [5-8] button of "Multi Screen Select".
OPERATING THE CAMERA