Panasonic WV-NS324 - Manual (Page 26)

-26-
This section describes setup procedures common to
accesses from the PC, e.g. transmitting images to an
FTP server, sending alarm notice mail, auxiliary device
control, clock setup, and LED control.
Buttons Used for Setup Menus
Click the buttons on the computer display. Each button
is assigned functions in the setup as follows.
Camera Setup Menus
• From the PC
1. Open the main page of the WV-NS324 camera,
referring to page 45.
Login as a level-1 administrator in the dialog box if
requested.
2. Click the [Camera Setup] button on the left side of
the screen.
The login dialog box will appear.
Note: Confirm the entered IP address when neither
the dialog box nor the main page appears.
You may need to re-enter the IP address.
3. Enter the registered user name and password.
Note: Enter "admin" when you operate the system
for the very first time, or you have not regis-
tered user names yet. At this time, you need
not to enter the password.
Menu control buttons will appear under the camera
image.
4. Click the [Menu ON] button to overlay ** SET UP
MENU ** on the camera image. The cursor is high-
lighted in the window.
Note: Refer to the next page for setup operations.
5. Click the [MENU OFF] button after finishing the
setup operations.
The changed settings will be stored in the camera,
and the overlaid camera menu will disappear.
Notes:
• If the browser screen pauses, access the cam-
era again on the WWW-browser to validate the
settings for PC oriented items.
• You can exit from the camera setup by clicking
the [Return] button, though the menu is dis-
played if the [MENU OFF] button has not been
clicked yet.
PRIOR TO SETUP
Menu ON/OFF button: Opens or closes the setup menu.
ESC button: Returns to the previous menu
(one layer higher) .
UP/DOWN button:
Moves up and down
the cursor (pointer).
RIGHT/LEFT button:
Selects parameters,
adjusts some levels.
SET button: Validates
the selection, opens a
detailed menu.
See page 45.
See page 45.