Panasonic 470 - Manual (Page 13)

Related publications 13
Example: If the command syntax is
http-server {enable | disable}
the options are enable or disable .
brackets ([ ]) Indicate optional elements in syntax descriptions. Do
not type the brackets when entering the command.
Example: If the command syntax is
show ip [bootp] ,
you can enter either
show ip or show ip bootp.
plain Courier
text
Indicates command syntax and system output.
Example:
TFTP Server IP Address: 192.168.100.15
vertical line | Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type
the vertical line when entering the command.
Example: If the command syntax is
cli password <serial | telnet> , you must
enter either cli password serial or cli
password telnet , but not both.
H.H.H. Enter a MAC address in this format
(XXXX.XXXX.XXXX).
Related publications
For more information about managing or using the switches, refer to the
following publications:
• Release Notes — Software Release 3.7 (NN47210-400)
• Nortel Ethernet Switch 460-24T-PWR — Installation (NN47210-300)
• Nortel Ethernet Switch 470 — Installation (NN47210-301)
• Nortel Ethernet Switch 460/470 Overview — System Configuration
(NN47210-501)
• Nortel Ethernet Switch 460/470 Security — Configuration
(NN47210-500)
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.