Configuring rmon using the cli, Show rmon alarm, Chapter 5 configuring rmon using the cli – Panasonic 470 User Manual
Page 83
83
Chapter 5
Configuring RMON using the CLI
The remote network monitoring (RMON) management information base
(MIB) is an interface between the RMON agent on an Ethernet Switch and
the RMON management applications. It defines objects that are suitable
for the management of any type of network. Some groups are specifically
targeted for Ethernet networks.
The RMON agent continuously collects statistics and proactively monitors
the switch.
This chapter covers the RMON commands available in the CLI and includes
the following topics:
•
•
•
•
•
•
•
•
•
•
•
•
show rmon alarm
The
show rmon alarm
command displays information for RMON alarms.
The syntax for the
show rmon alarm
command is:
show rmon alarm
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503
01.01
Standard
3.7
22 February 2007
Copyright © 2005-2007, Nortel Networks
Nortel Networks Confidential
.