Panasonic 470 - Manual (Page 43)

Displaying port statistics 43
Figure 11
show port-statistics command output
clear-stats command
The clear-stats command clears all statistical information for the
specified port. All counters are set to zero (0). The syntax for the
clear-stats command is:
clear-stats [port <portlist>]
The clear-stats command is in the config-if command mode.
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.