Panasonic 470 User Manual
Page 44
Advertising
44
Chapter 2 Configuring network monitoring using CLI
Table 14 "clear-stats command parameters and variables" (page 44)
describes the parameters and variables for the
clear-stats
command.
Table 14
clear-stats command parameters and variables
Parameters and
variables
Description
port <portlist>
Specifies the port numbers to clear of statistical
information; enter the port numbers.
Note: If you omit this parameter, the system uses the
port number specified with the
interface
command.
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503
01.01
Standard
3.7
22 February 2007
Copyright © 2005-2007, Nortel Networks
Nortel Networks Confidential
.
Advertising