Panasonic TQBH9003-6 - Manual (Page 121)

121
q q Switch to “SD CARD” using the input switching (RGB) button
on the projector or the remote control.
Switching is also available on the screen of the projector control.
w w Click “SD control” of the menu.
e
e Select from folders in the SD card.
r
r Select form control modes (presentation and list).
SD control
Projector control
Notes:
• When the power is turned ON, confirm that the indicator
lamp is lighting, then go to the top screen again.
• Immediately after power turning ON, it may happen to
be unable to connect with the projector. If this is the
case, wait for a while and then try connection again.
• Either basic control or option control will not function
unless Web power is set to ON in the option setting of
the projector.
• Power ON operation will not occur unless Web power is
set to ON in the option setting of the projector. At this
moment, however, the projector control screen has the
same indications as those displayed when normal
operation is available.
Presentation
The NEXT button will project the
next image and the PREV button
the previous image.
List
A list of files that can be replayed
will appear. Press the button
located at the right of the desired
file for replay, and the image will
be projected.
Menu screen
Press Projector control or SD control.