Pioneer VSX-C301 - Manual (Page 11)

Connecting your equipment 03
11
En
English Connecting a satellite/cable receiver or other set-top box
Satellite and cable receivers, and terrestrial digital TV
tuners are all examples of so-called ‘set-top boxes’.
1 Use a SCART cable to connect the STB IN AV
connector to an AV connector on the set-top box
component.
This carries video and analog stereo audio signals from
the set-top box component to this receiver.
2 Use an optical digital audio cable to connect the
STB(DVD) OPT1 jack to an optical digital audio
output on the set-top box component.
This connection carries stereo and multichannel digital
audio.
If your set-top box component doesn’t have an optical
digital audio out jack, it is possible to use a coaxial
connection to the
DVD(STB) COAX jack. However, since
by default this input is assigned to the DVD input, you
will need to reassign it to the STB input before you can
use it. After connecting up everything else see Coaxial
input setting on page 32 for how to do this.
• If your satellite/cable receiver doesn’t have a digital
audio output, omit step 2 above.
COAX
CONTROL
AV CONNECTOR
AC IN
DVD IN STB IN
VIDEO IN/OUT DVR/TV IN/OUT
FM UNBAL 75 Ω
AM LOOP
ANTENNA
IN
OUT
SUB
WOOFER
OUT
STB (DVD)
OPT1 DVR/TV
OPT2
DVD (STB)
DIGITAL IN
CENTER L R L R FRONT SURROUND
SPEAKERS
DIGITAL OUT AV CONNECTOR OUT
VSX-C301
STB
vsx-c301.book 11 ページ ２００３年２月６日 木曜日 午後５時４分