Plugging in the receiver, Connecting your equipment 03, Many pioneer components have – Pioneer VSX-C301 User Manual

Page 16: Control, Using the remote control with other components, On page 34 for how to do this

Advertising
background image

Connecting your equipment

03

16

En

Operating other Pioneer components
with this unit’s sensor

Many Pioneer components have

CONTROL

jacks which

can be used to link components together so that you can
use just the remote sensor of one component. When you
use a remote control, the control signal is passed along
the chain to the appropriate component.

1

Decide which component you want to use the

remote sensor of.

When you want to control any component in the chain,
this is the remote sensor that you will point the remote
control at.

2

Connect the CONTROL OUT jack of that

component to the CONTROL IN jack of another
Pioneer component.

Use a cable with a mono mini-plug on each end for the
connection.

3

Continue the chain in the same way for as many

components as you have.

• You can also set up the supplied remote to control

other components in your system (both Pioneer and
non-Pioneer). See

Using the remote control with

other components

on page 34 for how to do this.

Plugging in the receiver

Only plug in after you have connected all your
components, including the speakers.

• Handle the power cable by the plug. Do not pull out

the plug by tugging the cable and never touch the
power cable when your hands are wet as this could
cause a short circuit or electric shock. Do not place
the unit or a piece of furniture, etc., on the power
cable, or pinch the cable. Never make a knot in the
cable or tie it with other cables. The power cables
should be routed such that they are not likely to be
stepped on. A damaged power cable can cause a fire
or give you an electrical shock. Check the power
cable once in a while. When you find it damaged, ask
your nearest Pioneer authorized service center or
your dealer for a replacement.

1

Plug the supplied power cable into the AC IN

socket on the back of the receiver.

2

Plug the other end into a power outlet.

COAX

CONTROL

AV CONNECTOR

AC IN

DVD IN

STB IN

VIDEO IN/OUT

DVR/TV IN/OUT

FM UNBAL 75

AM LOOP

ANTENNA

IN

OUT

SUB

WOOFER

OUT

STB

(DVD)
OPT1

DVR/TV

OPT2

DVD

(STB)

DIGITAL IN

CENTER

L

R

L

R

FRONT

SURROUND

SPEAKERS

IN

OUT

CONTROL

IN

OUT

CONTROL

VSX-C301

vsx-c301.book 16 ページ 2003年2月6日 木曜日 午後5時4分

Advertising
This manual is related to the following products: