Pioneer VSX-C301 - Manual (Page 30)

Using other functions 08
30
En
Default receiver settings
The table below shows the factory default settings. When
you reset the system, the receiver reverts to these
defaults (see
Resetting the system on page 29).
• The default settings for the remote control to control
other components can be found in Using the remote
control with other components on page 34.
Setting type Default setting Page ref.
Input DVD
Master volume – – – dB (no sound)
Listening mode AUTO (all inputs) Page 23
Listening mode (w/
headphones) STEREO (all inputs) Page 23
Sound mode OFF Page 24
Dialog OFF Page 24
Virtual Surround Back OFF Page 24
Input signal select AUTO Page 29
Speakers (Front,
Center, Surround)
Setting Automatically sensed Page 31
Subwoofer setting 200 Hz Page 31
LFE Attenuator 0 dB Page 32
Front speaker distance 2.0 m Page 32
Center speaker
distance 2.0 m Page 32
Surround speaker
distance 2.0 m Page 32
Dynamic Range
Control OFF Page 32
Dual Mono ch1 Page 32
Input Attenuator OFF (all inputs) Page 32
DVD(STB) COAX jack
assignment
DVD Page 32
STB(DVD) OPT1 jack
assignment
STB Page 32
Setting the volume
level of each channel Front: 0 dB
Center: 0 dB
Surround: 0 dB
Subwoofer: 0 dB
Page 33
AV Direct setting MANUAL Page 33
Auto Input Select
setting MANUAL Page 33
Room Setup M / MID Page 21
vsx-c301.book 30 ページ ２００３年２月６日 木曜日 午後５時４分