Operating range of the remote control, Controls and displays 04 – Pioneer VSX-C301 User Manual

Page 20

Advertising
background image

Controls and displays

04

20

En

ADVANCED SURROUND

Use to select an

ADVANCED SURROUND

mode for

the current source.

SOUND MODE

Use to select a

SOUND MODE

for the current

source.

DIALOG

Press to switch on/off

DIALOG

(dialog

enhancement).

10 MUTE

Press to mute all output. Press again (or adjust the
volume using the

MASTER VOLUME

control) to restore

the sound.

11 SIGNAL SELECT

(page 29)

Use to select the analog or digital signal for the

DVD

,

STB

,

DVR/TV

and

FRONT

inputs.

12 MASTER VOLUME

Use to adjust the volume.

13 ROOM SETUP

(page 21)

Use to select a preset room setup.

14 SYSTEM SETUP

(page 31)

Press to access the

SYSTEM SETUP

menu to make

detailed receiver settings.

15 Cursor keys and ENTER

Use to navigate menus and select options/execute
commands.

16 VIRTUAL SB

(page 24)

Press to switch on/off the virtual surround back mode.

17 DIMMER

First press

RECEIVER

, then press

DIMMER

repeatedly to

change the brightness/switch off the front panel display.
The display will light brightly for about two seconds when
you operate the receiver with the display off or dimmed.
(Note that the master volume indicator always remains
lit, even when the rest of the display is off.)

18 Playback controls

(page 36)

Playback controls for external components, such as DVD
and CD players.

Functions printed in blue control the built-in tuner; other
functions control other external equipment.

19 Number buttons

(page 36)

Use for numerical input of track numbers, radio
frequencies, and so on.

20 CHANNEL +/–

(page 36)

Use to change channels on a satellite receiver, cable
box, VCR or DVR.

21 TV CONTROL buttons

(page 34)

Use to control your TV (after setting up the remote
control to work with your TV).

Operating range of the remote control

The remote control may not work properly if:

• There are obstacles between the remote control and

the receiver's remote sensor.

• Direct sunlight or fluorescent light is shining onto

the remote sensor.

• The receiver is located near a device that is emitting

infrared rays.

• The receiver is operated simultaneously with another

infrared remote control unit.

30

30

7m

vsx-c301.book 20 ページ 2003年2月6日 木曜日 午後5時4分

Advertising
This manual is related to the following products: