Setup menu options, The system setup menu, English – Pioneer VSX-C301 User Manual

Page 31: The system setup menu 09, Chapter 9

Advertising
background image

The System Setup menu

09

31

En

English

Chapter 9

The System Setup menu

Making receiver settings from the
System Setup menu

This receiver allows you to make detailed settings to
optimize the surround sound performance. You only
need to make these settings once (unless you change
the placement of your current speaker system or add
new speakers.).

1

If the receiver isn’t already on, press

RECEIVER to switch it on.

2

Press SYSTEM SETUP to enter the setup menu.

3

Use the

and

buttons to select a setup

parameter to adjust.

As you scroll through the options, the current settings
are displayed. See below for a full list and description of
each.

4

Use the

and

buttons to change the current

setting.

5

After making all the settings, press ENTER to exit

the setup menu.

Setup menu options

Below are all the available settings in the setup menu.
The first setting in each section is the default. See also
the notes in each section for additional information
about the settings.

Front speakers setting

Specifies the size of the front speakers:

FRONT S

– Small (the cone diameter is less than

12cm)

FRONT L

– Large (the cone diameter is 12cm or

greater)

Center speaker setting

Specifies the size of the center speaker:

CENTER S

– Small (the cone diameter is less than

12cm)

CENTER L

– Large (the cone diameter is 12cm or

greater)

CENTER ––

– If you have not connected a center

speaker

Surround speaker setting

Specifies the size of the surround speakers:

SURR. S

– Small (the cone diameter is less than

12cm)

SURR. L

– Large (the cone diameter is 12cm or

greater)

SURR. ––

– If you have not connected surround

speakers

• If the front speakers are set to

FRONT S

you can’t

choose

SURR. L

for the surround speakers or

CENTER L

for the center speaker.

Subwoofer setting

This option only appears if you have connected a
subwoofer. Note that some subwoofer settings are not
available depending on other speaker settings.

Specifies the behavior of the subwoofer:

SUBWF 200

– Most of the bass frequencies are

played through the subwoofer

SUBWF 150

– Only the very lowest bass frequencies

are played through the subwoofer

SUBWF 100

– Mid setting

SUBWF PLS

– For extra bass power

SUBWF –––

– No sound from the subwoofer

• The

SUBWF PLS

setting is only available when the

front speakers are set to

FRONT L

.

• When all speakers are set to

L

, you cannot select the

SUBWF 200

, or

SUBWF 150

settings.

• If you set the front speakers to

FRONT S

, you cannot

select the

SUBWF –––

setting.

AUDIO

SOURCE

RECEIVER

SLEEP

RECEIVER

AV DIRECT

INPUT

DVD

VIDEO

STB

FRONT

FM/AM

DVR/TV

SURROUND

SOUND

MODE

SIGNAL
SELECT

DIALOG

AUTO

STEREO

LEVEL

TEST TONE

CH SELECT

MUTE

MASTER
VOLUME

DTV MENU
TOP MENU

T.EDIT
MENU

GUIDE

SEARCH

SUBTITLE

ROOM
SETUP

SYSTEM

SETUP

BAND

EON RETURN

RF ATT

A

DISPLAY

CLASS

MPX

DACCESS

ENTER

VIRTUAL SB

DIMMER

vsx-c301.book 31 ページ 2003年2月6日 木曜日 午後5時4分

Advertising
This manual is related to the following products: