Pioneer VSX-C301 - Manual (Page 12)

Connecting your equipment 03
12
En
Connecting other video components
The VIDEO IN/OUT AV connector can be used for a VCR
or other video player or recorder with analog audio. The
DVR/TV IN/OUT AV connector and associated digital
audio connection (the DVR/TV OPT2 jack) can be used
with digital video components, such as a DVD recorder,
that can play digital soundtracks.
1 Use a SCART cable to connect the VIDEO IN/OUT
AV connector to an AV connector on your VCR (or
other video component).
This allows playback from and recording to the VCR (or
other component).
2 Use a SCART cable to connect the DVR/TV IN/
OUT AV connector to an AV connector on your DVD
recorder (or other video component).
This allows playback from and recording to the DVR (or
other component), including RGB video.
3 Use an optical digital audio cable to connect the
DVR/TV OPT2 jack to an optical digital audio output
on your DVD recorder (or other video component).
This connection carries stereo and multichannel digital
audio.
• Some TVs have both RGB and i/o-Link.A compatible
AV connectors, or a single AV connector is
switchable. See the instructions that came with your
TV for more details. This receiver is compatible with
both formats without the need to switch.
• When the DVR is switched on, make sure that it is set
to the correct input so that audio/video from the
receiver gets passed through to the TV.
• When the receiver is unplugged or in standby (with
AV Direct off), you may be able to hear distorted
sound from the
VIDEO IN/OUT AV connector and
the DVR/TV IN/OUT AV connector if a connected
component is playing.
COAX
CONTROL
AV CONNECTOR
AC IN
DVD IN STB IN
VIDEO IN/OUT DVR/TV IN/OUT
FM UNBAL 75 Ω AM LOOP
ANTENNA
IN
OUT
SUB
WOOFER OUT
STB (DVD)
OPT1 DVR/TV
OPT2
DVD (STB)
DIGITAL IN
CENTER L R L R
FRONT SURROUND SPEAKERS
AV CONNECTOR
OPTICAL COAXIAL
DIGITAL OUT
VIDEO IN/OUT VIDEO IN/OUT
AV CONNECTOR OUT
TV
AV CONNECTOR IN
VSX-C301
DVR, etc.
VCR, etc.
vsx-c301.book 12 ページ ２００３年２月６日 木曜日 午後５時４分