Philips WAC5 - Manual (Page 18)

English
18
Preparation
Using the display on the Center’s remote
control
You can synchronize the local display of your
Center or Station onto the display of Center’s 2-
way remote control. With the synchronized
display, your operation of remote control
becomes quicker and easier.
Note:
– Avoid placing your Center or Station close to the
plasma TV. It may interfere with the Center’s
remote control and cause improper display on your
Center’s remote control. In this case, turn off your
plasma TV or use Station’s remote control.
– If you switch on your Center or Station using the
STANDBY-ON/ ECO POWER button on the
set, press REFRESH on Center’s remote control
to synchronize the remote control’s display.
– The display supports 6 European languages:
English, French, Spanish, Dutch, Italian and German.
Helpful hints:
– To operate Center using the remote control
again, repeat the above steps 1-2 to select Center.
– Center’s remote control will return to its
default setting (works with Center only)
when you insert new batteries into it. Using the navigation controls
When selecting options on the set’s screen, you
often need to use the navigation controls 1 / 2
/ 3 / 4.
1
Press 3 / 4 to highlight an option
2
Enter its submenu by pressing 2
3
Press 1 to return to the previous option list
screen
4
Press OK or 2 to confirm
p001-p037_WAC5_Eng_22 9/14/2005, 15:08 18