Philips WAC5 - Manual (Page 28)

English
28
Station management
Adding a station
You can add a station to an existing Wi-Fi
network of Center and Station. Up to 5 stations
can be connected to a WAC5 Center.
On Center
1
Switch on WAC5 Center and select HD source
2
To select Add New Station on Center
a. Press and hold STOP • MENU to enter the
MENU screen (or on remote control, press
MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter
Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
➜ You will enter the Installation Mode.
Searching for the new station starts
➜ Playback stops on the previously associated
Station if you are playing the HD source
On Station
3
Connect the new station to power supply
4
To select Installation Mode,
a. On the remote Control, press MENU
b. use the navigation controls 3 or 4 and 2 to
select
On Center
5
Press STOP/ Ç on the Center when all your
stations are found
Helpful hints:
– To change your setting of Wi-Fi connection, see
the manual Connect to your PC.
Deleting a station
1
Switch on WAC5 Center and select HD source
2
To select Delete Station on Center
a. Press and hold STOP • MENU to enter the
MENU screen (or on remote control, press
MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter
Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
➜
The Center ‘s display shows the list of
connected stations
HD
3
Press 3 or 4 and 2 to select the station you
wish to delete
4
Press 3 or 4 and 2 to select Yes
Viewing station status
1
Switch on WAC5 Center and select HD source
2
To select Station Status on Center
a. Press MENU.
b. Use the navigation controls 3 or 4 and 2 to
enter
Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
➜ On the Center ‘s display shows the list of
stations connected or ever connected
3
Press 2 to view the connection information
Information about your WAC5
1
Switch on WAC5 Center and select HD source.
2
To select Information on Center
a. On remote control, press MENU (or on
Center, press and hold STOP • MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter Information menu
➜ The display shows: the name of Center or
Station, firmware version and free harddisk space
Firmware
Upgrading firmware
The supplied PC Installer CD contains Digital
Media Manager (DMM) software. It will help
you get the upgrades for WAC5 Center. For
details, see DMM’s help file. Refer to the manual
Connect to your PC to learn how to install
DMM software.
Restoring previous firmware
After the Center’s firmware is upgraded, you can
restore it to its previous version as desired.
1
In Center’s HD mode, press MENU
2
Use the navigation controls 3 or 4 and 2 to
enter
Settings menu
p001-p037_WAC5_Eng_22 9/14/2005, 15:09 28