Philips WAC5 User Manual
Page 29
29
English
HD
Re-establishing Wi-Fi connection
After upgrading or restoring the Center’s
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
On Center,
●
Select
HD mode and then, enter Installation
Mode by:
a. Press and hold
STOP • MENU (or on
remote control, press
MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter
Station Mgnt menu
c. In
Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select
Add New
Station
➜
Searching for Stations starts
On the Stations,
●
Enter
Installation Mode by:
a. Remove the Station’s power plug and then,
connect it to the power supply again
➜
“
Connecting to Center” appears
b. On the remote control, press
MENU to
enter the selection screen of
Installation
Mode and Select Server
c. Use the navigation controls 3 or 4 and 2 to
select
Installation Mode
On Center,
●
Press
STOP
Çto exit Installation
Mode when Center has found all the stations
3
Press 3 or 4 and 2 to select
Firmware
4
Press 3 or 4 and 2 to select
Restore
firmware
5
Press 3 or 4 and 2 to select
Yes.
p001-p037_WAC5_Eng_22
9/14/2005, 15:09
29