Reset – Philips WAC5 User Manual

Page 34

Advertising
background image

English

34

Reset

Reset

If desired, you can restore your Center or Station
to their default setting (including the network
setting).

When to reset Center or Station:

Resetting Center or Station helps to re-establish
the connection between Center and Station.

To change the way your Center connects to PC,
you need to reset the Center (see the Option 1,
Option 2 or Option 3 in manual Connect to
your PC)

1

Check the set is switched on (See

Basic

functions, Switching on/to standby and
selecting functions, Switching to Eco
power/ on
)

2

Press and hold

STOP • MENU to enter the

MENU screen (or on the remote control, press
MENU)

3

Use the navigation controls 3 or 4 and 2
to enter

Settings

4

Use the navigation controls 3 or 4 and 2
to enter

Restore settings

5

Press 3 or 4 and 2 to select

Yes

The set is rebooted. Language selection

screen appears

6

Select your desired language: English, French,
Spanish, Dutch, Italian and German

The set enters Installation Mode

The search for Center or Stations starts. The

Wi-Fi connection is being re-established

If the Center is reset and Stations are
not reset:

On the Stations, enter

Installation Mode by:

a. Remove the Station’s power plug and then,

connect it to the power supply again

Connecting to Center” appears

b. Press

MENU or STOP to enter the selection

screen of

Installation Mode and Select

Server

c. Use the navigation controls 3 or 4 and 2 to

select

Installation Mode

If a Station is reset and the Center is not:

On the Center, select

HD mode and then, enter

Installation Mode by:
a. Press

MENU

b. Use the navigation controls 3 or 4 and 2 to
enter

Station Mgnt menu

c. In

Station Mgnt menu, use the navigation

controls 3 or 4 and 2 to select

Add New

Station

Searching for Stations starts

If both Center and Stations are reset:

Do as you did in the first-time Wi-Fi connection
(see

Installation, Set up Wi-Fi connection

between Center and Station)

7

On Center, press

STOP

Çto exit Installation

Mode when all your Stations are found

p001-p037_WAC5_Eng_22

9/14/2005, 15:09

34

Advertising