Philips WAC5 - Manual (Page 19)

19
English
Basic functions
Switching to standby/on and
selecting functions
1
When the set is on, press STANDBY-ON/
ECO POWER to switch it to standby (or y
on the remote control)
➜ Display shows GoodBye
➜ The Red indicator lights up
➜ The screen dims out. Display shows Station
Status screen and the number of stations found
2
To switch on, press STANDBY-ON/ ECO
POWER on the set
➜
The set switches to the last source selected
➜
The Green indicator lights up
●
You can also switch on the set by pressing the
source button on Center’s remote control
(e.g.
HARDDISK, CD/MP3-CD, AUX)
3
To select Center’s function, press SOURCE
once or more on the set (or HARDDISK, CD/
MP3-CD, AUX on the remote control)
STANDBY-ON
Switching to power-saving mode
In the power-saving Eco power mode, the set’s
display and Wi-Fi connection are turned off. The
Center’s harddisk also stops working. When you
switch Center to Eco power, it is impossible to
move music between Center and Station or
import music from PC to Center.
1
When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to Eco
power (or
y on the remote control).
➜ The display is switched off
➜ The Red indicator lights up
2
To switch on, press and hold STANDBY-ON/
ECO POWER (or y on the remote control)
or press and hold SOURCE on the set
➜
The set switches to the last source selected
Helpful hints:
– In the standby/Eco power mode, the settings of
networking, display and language will be retained in
the set’s memory.
– To protect the hard disk, always switch Center to
standby/ECO POWER before removing its power
plug from the wall outlet.
Auto-standby
●
When the set has reached the end of playback/
recording and remains in the stop position for
more than 5 minutes, the set will switch to
standby automatically to save power.
ECO
POWER
p001-p037_WAC5_Eng_22 9/14/2005, 15:08 19