Patton electronic SmartNode 2294 - Manual (Page 16)

SmartNode Series Leased-Line Extenders overview 16
Model 2292 & 2294 Series Getting Started Guide 1 • General information
SmartNode 2292 and 2294 Leased-Line Extenders
The SmartNode 2292 and 2294 models are compact Leased-Line Extenderss over IP that support two or four
VoIP channels, depending on the number of ports (see
figure 2 ).
Figure 2. Examples of SmartNode 2292 and 2294 Series rear panels
The following base models (each equipped with two 10/100Base-T Ethernet ports) are available:
• SmartNode 2292/EUI (2 VoIP leased line channels)
• SmartNode 2294/EUI (4 VoIP leased line channels)
The port combinations are indicated in the extension of the model code. T he following model code conven-
tions apply:
• The last number in the model code stands for the number of voice ports.
• EUI stands for external universal input power supply (see figure 3 )
For example, the model code 2294/EUI describes a SmartNode configured as follows:
• 4 voice ports
• External power supply
Note For a complete listing of available models, refer to the SmartNode
VoIP page at http://www.patton.com/voip/.
Model 2292
Model 2294
ETH 0/1 ETH 0/0
Ports
Reset , 1.25A
, 1.25A Reset
Ports
ETH 0/1 ETH 0/0
, 1.25A
Reset
Ports
ETH 0/1
ETH 0/0