Iv. assembly – Pride Mobility Jazzy Select Series User Manual
Page 20
![background image](/manuals/177329/20/background.png)
20
www.pridemobility.com
Select Traveller
INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 8 details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by a qualified caregiver before using the product or making
comfort adjustments. There are two hex keys provided for use with controller installation and adjustment, and foot
platform adjustment.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Pride Provider.
I V . A S S E M B L Y
Figure 8. Select Traveller Assembly View
BATTERY COVER
SEAT INSTALLATION
ARMREST WIDTH
ADJUSTMENT
CONTROLLER
POSITION
SEAT HEIGHT
ADJUSTMENT
BATTERIES
FOOT PLATFORM DEPTH ADJUSTMENT