Pride Mobility Jazzy Select Series - Manual (Page 24)

24 www.pridemobility.com Select Traveller
V . C O M F O R T A D J U S T M E N T S
To change the controller position:
1. Unplug the controller connector from the power
base.
2. Cut the wire tie(s) securing the controller harness
to the armrest.
3. Flip up the armrest and loosen the setscrew. See
figure 13.
4. Slide the controller out of the armrest.
5. Loosen the setscrew in the other armrest.
6. Place the controller in the other armrest.
7. Tighten the setscrew in both armrests.
8. Use wire ties to secure the controller harness to the
armrest.
9. Plug the controller connector into the power base.
Foot Platform Height Adjustment
To adjust the foot platform height:
1. Remove the hardware from the foot platform
bracket. See figure 14.
2. Move the foot platform up or down to the desired
height.
3. Reinstall the hardware into the foot platform
bracket and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the hardware from the foot platform
bracket. See figure 14.
2. Move the foot platform in or out to the desired
depth.
3. Reinstall the hardware into the foot platform
bracket and tighten.
Figure 14. Foot Platform Depth