Appendix i – specifications – Pride Mobility Jazzy Select Series User Manual

Page 36

Advertising
background image

36

www.pridemobility.com

Select Traveller

A P P E N D I X I – S P E C I F I C A T I O N S

SPECIFICATIONS

Suspension:

Standard Limited

Drive Wheels:

8 in. (20.32 cm), solid

Front Caster Wheels:

5 in. (12.7 cm), solid

Rear Anti-tip Wheels:

3 in. (7.62 cm), solid

Maximum Speed:

1

Up to 3.5 mph (5.63 km/h)

Brakes:

“Intelligent Braking” electronic regenerative, disc park brake

Ground Clearance:

2

See figure 19.

Turning Radius:

2

See figure 19.

Overall Size:

2

Length:

See figure 19.

Width:

See figure 19.

Drivetrain:

Two motor, rear-wheel drive

Batteries:

3

Two 12-volt U-1 batteries

Range:

1, 4

Up to 12 miles (19.31 km)

Battery Charger:

3-amp, off-board

Weight Capacity:

300 lbs. (136 kg)

Component Weights:

5

Base: 70 lbs. (31.75 kg)
Seat: 27 lbs. (12.25 kg)
Batteries: 24.5 lbs. (11 kg) each

1

Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors,

controller type, tire type, and tire condition. This specification can be subject to a variance of +10%, -5%.

2

Due to manufacturing tolerances and continued product improvement, this specification can be subject to variance of

(+ or -) 3%.

3

AGM or Gel-Cell type required. See VI. “Batteries and Charging.”

4

Tested in accordance with ANSI/RESNA WC Vol 2, Section 4 and ISO 7176-4 Standards. Results derived from

theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum

weight capacity.

5

Battery weight may vary based on manufacturer.

NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series EN12184

standards. All specifications subject to change without notice.

Advertising