Philips PPF685 - Manual (Page 24)

24 Philips · PPF 685 · 695
EN
7 Cordless Telephone
Looking for Cordless Tele-
phone
Using the Search Function
This function helps you in locating cordless telephones,
which you have misplaced. For this purpose the cordless
telephones must be registered with the device and must be
within its range.
Press { on the device. All cordless telephones registered
with the device ring for approx. one minute.
Dect Look Up
Switching On and Off
You can switch your cordless telephone off to save power.
Press and hold ’ (at least two seconds) for switching off
the cordless telephone. Press and hold “ (at least two sec-
onds) for switching on the cordless telephone.
Navigating in the Menu
Navigating in the Menu
Press one of the two arrow keys [ to open the function
menu. Page through [ menu entries. Use OK to select a
menu function. Press C to return to the previous menu
level. Press ’ to close the menu and return to the starting
mode.
Keypad lock
On monochrome Dect
1 Press [, and using [ to select SETTINGS .
2 Confirm with OK.
3 Using [ select SECURITY .
4 Confirm with OK.
5 Using [ select KEYPAD LOCK .
6 Confirm with OK.
7 Using ô select Yes to switch on the function. Using
õ
select No to switch on the function.
On colour Dect
1 Press [, and using [ select SECURITY .
2 Confirm using OK.
3 Using [ select KEYPAD LOCK .
4 Confirm with OK.
5 Using ô select Yes to switch on the function. Using
õ
select No to switch on the function.
Activating emergency call
number
Emergency Call Number
Using this function you can save a number as an emer-
gency call number. If the emergency call function is acti-
vated, the number is dialled as soon as “ is pressed. You
can dial and call other telephone numbers with the
numeric keypad.
No Actual Emergency Call Numbers
On monochrome Dect
1 Press [, and using [ to select SETTINGS .
2 Confirm with OK.
3 Using [ select SECURITY .
4 Confirm with OK.
5 Using [ select EMERGENCY .
6 Confirm with OK.
7 Press õ EDIT ENTRY .
8 Using [ select ACTIVATE to switch on the func-
tion. Using [ select DEACTIVATE to switch off the
function.
9 Confirm with OK.
Emergency Call Function
Modifying the Emergency Call Number
1 Press [, and using [ to select SETTINGS .
2 Confirm with OK.
3 Using [ select SECURITY .
4 Confirm with OK.
5 Using [ select EMERGENCY .
6 Confirm with OK.
7 Press õ EDIT ENTRY .
8 Using [ select CHANGE NO .
9 Confirm with OK.
10 Enter the telephone number.
11 Confirm with OK.
Notice
Access Function
You can also call the function by pressing OK,
81
and OK.
Notice
No Actual Emergency Call Numbers
It is recommended not to save any actual emer-
gency call number (e.g. police or fire brigade)
with this function, so that you do not acciden-
tally call this emergency call number.
Notice
Initial Activation
When you activate the function for the first
time, you must enter a number. This number
remains stored.