Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 168)

12-6 Troubleshooting
202 Copy start position must be 1 to 255.
203 Destination start position must be 1 to 255.
204 Source field must be 0 to 999.
205 Copy type must be 1 (copy after rules) or 2 (copy before rules).
211 Narrow element value is less than 1 or greater than 99. Correct the
value and resend the format to the printer.
212 Wide element value is less than 1 or greater than 99. Correct the
value and resend the format to the printer.
214 Truncation code must be S (standard) or T (truncated bar code).
215 Aspect code must be C (columns) or R (rows).
216 Option definition must be S (set) or T (template).
217 Input device must be D (Default), H (Host), K (Keyboard), N (None),
or S (Scanner).
220 Check digit selection must be G to generate check digit.
221 Primary or secondary price format is outside the range 1 to 15.
222 Data type restriction is outside the range of 1 to 6.
223 Option is not valid for the field.
Online Configuration Errors (250 - 299)
251 Power up mode must be 0 (online).
252 Language selection must be 0 (English).
253 Batch separator code in a supply setup packet must be 0 (off).
254 Slash zero selection must be 0 (standard zero).
255 Supply type must be 0 (black mark) or 1 (die cut).
256 Ribbon selection must be 0 (direct) or 1 (transfer).
257 Feed mode must be 0 (continuous) or 1 (on-demand).