Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 27)

Configuring the Printer 3-3
Set Print Method
Select Print Method
Auto Print 1 Label
Print Strips
Print Loop –Trigger
On-Demand Printing
On-Demand w/Limit
Full Auto
Scroll to select a print method (described below)
and press e. The General Options Menu
appears. Default: Print Loop - Trigger.
Auto Print 1 Label Prints one label.
Print Strips Prints a strip of labels, prompting the operator for a
quantity.
Print Loop – Trigger Prints one label at a time, printing another at the press
of any key or the trigger. Press b to end.
On-Demand Printing Peel Mode Only. Prints labels one at a time,
continuing only after you remove the previous one.
Press b to end.
On-Demand w/Limit Peel Mode Only. Prints labels one at a time,
continuing only after you remove the previous one.
The software prompts the operator for a quantity.
Full Auto Prints a strip of labels at one time. Press b to end.
Set Date
Current date is Thu
2-08-2001
Enter new date (mm-d
d-yy): Enter the date (with a four-digit year), and press
e. If the date is correct, press e.
The General Options Menu appears.
Set Time
Current time is 03:0
0:34.65p
Enter new time: Enter the time (including a colon to separate the
hour and minute). To indicate a.m. or p.m.,
include an a or p at the end. For example, 5:00p.
24-hour mode also works. When finished, press
e. If the time is already correct, press
e. The General Options Menu appears.