Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 38)

4-6 Designing a Format
S t a r t i n g t h e D e s i g n P r o c e s s
Turn on the printer. You will see the Main Menu.
- = Main Menu = -
1. Design Formats
2. Print Labels
3. Configuration 1. From the Main Menu, press 1 to design
your formats.
- = Design Menu = -
1. Create New Format
2. Edit Old Format
3. Copy Format
4. Delete Format 2. Press 1 to create a new format.
Enter Format Name
> _ _ _ _ _ _ _ _ _ _ _ _ _
L
3. Type UPCA for the format name. Press
e.
Enter Length of
supply (55 – 400)
(eg. 400 = 4 inches)
> _ _ _ 4. Type 200. Press e.
Select Supply Width
1. 1.20 Inches
2. 1.50 Inches
3. 2.00 Inches 5. Press 3 for your supply width.
Select Type: Fld #1
1. Text Field
2. Bar Code Field
3. Constant Text
4. Line
5. Finished 6. Select a field type (1-5) for field 1.
♦ To define text fields, see Chapter 5, “Defining
Text Fields.”
♦ To define bar code fields, see Chapter 6,
“Defining Bar Code Fields.”
♦ To define constant text fields, see Chapter 7,
“Defining Constant Text Fields.”
♦ To define line fields, see Chapter 8, “Defining
Line Fields.”
♦ Select 5 when finished designing your
format (after all fields are defined).
Save current
format? Y/N > _ 7. Press Y to save the format or press N to exit
without saving the format. You return to the
Design Menu.