Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 68)

6-10 Defining Bar Code Fields
Printed : 1
5. Press the trigger to print another label or
press b to return to the prompt and print
another label.
This sample prints the following label.
Sample 2: Simple Variable Bar Code
The following procedure creates a Code 128 bar code on a 2.0-inch long by
2.0-inch wide supply.
NOTE: This sample uses the printer’s factory-set defaults. For more
information about your printer’s configuration, see Chapter 3,
“Configuring the Printer.”
-=Main Menu=-
1. Design Formats
2. Print Labels
3. Configuration 1. From the Main Menu, press 1.
-=Design Menu=-
1.Create New Format
2,Edit Old Format
3.Copy Format
4.Delete Format 2. Press 1 to create a new format.
Enter Format Name
>_ _ _ _ _ _ _ _ _ _ _ _ _ _
L
3. Type CODE128 for the format name. Press
e.
Enter Length of
Supply (55-400)
(eg.400 = 4 inches)
>_ _ _ 4. Type 200 for the length of your supply. Press
e.