Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 62)

6-4 Defining Bar Code Fields
Bar Height Height of the bar code in 1/100 inches. For
example, 100 = 1 inch. The value is dependent on
the length of the label used. The minimum value is
1.
Appearance Depending on your printer’s configuration, enter
the appearance of the bar code (UPC and EAN
family only). For more information about your
printer’s configuration, see Chapter 3, “Configuring
the Printer.” See ”Setting the Appearance” for
information about the appearance choices.
Justification Depending on your printer’s configuration, enter an
alignment for the field. For more information about
your printer’s configuration, see Chapter 3,
“Configuring the Printer.” Choices include Left (L),
Right (E), and Center (B).
Field Rotation Rotation of the selected field. Choices include:
Top of Supply, Left of Supply, Bottom of Supply,
and Right of Supply.
Left/Center/Right-Justified Fields
Balanced Fields End-Justified Fields