Paxar Monarch DOS-based Pathfinder Ultra System 6035 - Manual (Page 25)

Configuring the Printer 3-1
C O N F I G U R I N G T H E P R I N T E R
The printer’s configuration sets both hardware and software
options. For example, you can set defaults for the printer to use during
format design and printing. This chapter describes the configurable options.
To get started, go to the Main Menu. When you see:
-=Main Menu=-
1. Design Formats
2. Print Labels
3. Configuration 1. Press 3. The Configuration Main Menu.
-Config. Main Menu-
1.General Options
2.Fmt Header Optns
3.Fmt Text Options
4.Fmt Barcode Optns 2. Select the option you want to configure.
Selections on the Configuration Main Menu are:
General Options Sets up the printer’s backlight, print method, date,
time, scan lengths for I2 of 5 bar codes, currency
symbol, and supply type. It also deletes formats
and turns off warning messages.
Format Header Options Sets up how you can identify the format you are
printing or editing.
Format Text Options Sets up the default settings for text fields during
Format Design.
Format Barcode Options Sets up the default settings for bar code fields
during Format Design.
NOTE: When you finish configuring the printer, press b until you return to
the Main Menu.
3