Pfaff 2170 - Manual (Page 105)

Embr
oidery
5:8
Context menu in embroidery
When touching the Context menu icon (A) a new window appears. The
Context menu changes whether you are sewing, embroidering, etc. It
always refers specifi cally to the menu that you have selected. When
you are on the embroidery page the following menus are active:
Options for messages
When you touch the Options for messages icon you can turn different
messages on or off.
Grid on
If you want more exact positioning of embroideries and stitches in the
hoop you can activate the grid on the workspace. Touch the Grid on
icon and the grid will be displayed, and the icon is shown as actively
selected (dark red).
Current state
If the embroidery process is interrupted or if you want to stop for the
time being, the current stitch number and position can be saved by
touching Current state icon in the Context menu before leaving the
embroidery mode. When touching the icon a pop-up will appear (B).
Touch the Save state icon to save the current position in the hoop under
the name of the present embroidery combination. This current position
will be saved even after switching the machine off. After switching the
machine on again touch the Restore state icon to continue embroidering
at the saved position.
Note: It is only possible to save one current position in the machine.
Move Hoop
When touching the Move hoop icon you can move the hoop to four
different locations: Park position, Sew position, Change bobbin position
and Cut position. Use the Park position when you want to put the
embroidery unit in the carrying case.
The Sew position is for when you want to sew with the embroidery
unit still attached to the machine.
The Change bobbin position moves the hoop as far back as possible
which will make it easier for you to change the bobbin.
If you touch the Cut position icon the hoop will move towards you,
making it easier for you to cut the threads when you are embroidering.
A
B