Pfaff 2170 - Manual (Page 111)

Embr
oidery
5:14
Get started to embroider
1. Attach the embroidery foot and thread the machine.
2. Attach the embroidery unit and lift the presser foot. Turn on your
machine.
3. Touch the Main menu icon and touch the Embroidery icon.
4. Insert your 300 creative card.
5. Touch the Mini Main menu (A) and touch Card/Machine icon.
A pop-up window will then appear so that you can choose if you
want a design that is on a card or in the machine.
6. Choose the card and select one of the designs that appears by
touching the picture of it. Touch OK to confi rm. The design now
appears on the screen in the hoop.
7. Attach the hoop with the hooped fabric to the embroidery unit.
If the hoop on the window does not match the hoop you have
inserted, your machine will not embroider. Touch the More options
icon (B) and the Hoop selection icon (C) to change the hoop.
5. Thread your machine with color no. 1. (Check your embroidery
booklet for more info on the colors).
6. Press the Reverse sewing button for a few seconds to start your
embroidery. The machine will now start to calibrate the hoop
to make sure that the correct hoop is inserted. Press the reverse
button again and the machine will begin to sew (or press your foot
control). After a few stitches the machine will stop in order for you
to cut the thread tail. The cut symbol will fl ash on your window.
Cut the thread tails and press the reverse button to continue
embroidering.
7. When the machine has sewn the fi rst color it will stop and the
machine will tell you to insert color no. 2. Change the top thread to
no. 2 and continue to embroider. Repeat this for all the colors.
8. When you have fi nished the last color the machine will return to
the beginning of the design. A message will appear and ask if you
want to place the hoop in the Park position. Touch OK and the
hoop will move to the Park position. Touch ESC to leave the design
on the screen.
9. Remove the hoop from the embroidery unit and cut the thread
ends.
Note: Go to you Context menu (D) and touch the Move hoop icon. Touch the Park
position icon and turn off the machine. Put the embroidery arm in the packing position
and remove the embroidery unit.
A
B
C
D