Pfaff 2170 - Manual (Page 113)

Embr
oidery
5:16
Embroider single designs from a card
Selecting a design
Once in the embroidery mode, touch the Mini Main menu and select
“Embroidery/Card”, to embroider a single design from either a
creative card or from the machine.
The Pfaff creative card 300 has several designs and alphabets and is
supplied with your Pfaff creative 2170.
Note: The Pfaff creative cards of the Pfaff creative 7570 can be used in the Pfaff creative
2170. If you use the cards for the Pfaff creative 7570, the designs do not appear on the
screen in the correct colors of the design.
Selecting a design from the machine’s memory or
from a creative card
Touch Embroidery/Card, and the following screen appears.
In this menu, you can call up embroidery designs from a creative card
or from the machine’s built-in memory.
The machine’s memory may contain:
1. The designs that have been saved in the machine from a creative
card.
2. Designs which have been created on a PC and saved in your 2170.
3. Previously created sewing sequences that you have saved
permanently in your Pfaff creative 2170.
4. Built-in embroidery designs and alphabet.
To select a design from the machine’s memory, touch the Machine icon
(A).
To select a design from a card, touch the Card slot icon (B) for the front
card drive and the card slot icon (C) for the rear card drive.
The procedure for selecting a design from the machine’s memory and
from a creative card is the same.
A
C
B