Pfaff 2170 - Manual (Page 39)

2:21
Pr
epar
ations
Set your Pfaff creative 2170 in the update mode
1. Connect the cable to a port on your computer then insert the card in
one of the card drives in your sewing machine.
2. Turn the machine on.
3. Touch the Main Menu.
4. Touch Context menu. Touch Firmware update. Choose yes to the
prompting question. A new pop-up with updating instructions
appears.
5. Read the instructions, then touch OK to prepare your Pfaff creative
2170 for updating. Yet another pop-up appears telling you that the
machine is waiting for data.
6. Click on the Update sewing machine icon on the computer
to start the update. The updating process will begin and after
approximately 20 minutes, you can restart the sewing machine
and your Pfaff creative 2170 is ready to use with the new program
version. If you have problems updating your Pfaff creative 2170,
see section Troubleshooting, page 2:23.
How to save the update program to your hard drive
Note: Depending on the Windows version installed on your computer, your screen may
look different than those shown.
1. Click on the update link, the following screen appears.
2. Choose
Save this fi le to disk by clicking in the white circle in front
of the text (if it has a dot in front of it, it is already selected). Click
OK.
3. The Save As window appears. If you have updated your 2170
previously, browse to the update folder you created and save the
new fi le there. Otherwise create a new folder according to the
instructions below.