Pfaff 2170 - Manual (Page 140)

Embr
oidery
5:43
2. Once you have the drawn the embroidery design on the template,
position the template on your fabric. Mark the hooping placement
lines on the project with a fabric-marking pen.
3. Then, when hooping the fabric, match the marked line with the
guide marks on the hoop.
4. Remove the template and put the hoop back into the machine and
start to embroider.
Note: You can also use the template if you stitch the design on scraps fi rst, before
embroidering the actual project. It is not necessary to embroider the entire design,
simply step through the different colors and embroider the outline (usually last color
only). When you have embroidered on scrap, place the template over the embroidered
design, and draw the outlines of it.