Pfaff 2170 - Manual (Page 116)

Embr
oidery
5:19
Multi-color embroidery
When embroidering a design consisting of several colors, you can
check the color order by touching the Color changing icon.
The top fi eld shows the color order, from top to bottom. The selection
arrow must be on the Color changing icon (C).
Have the colors ready in the order in which they are needed, and
thread the fi rst color.
1. Press the foot control, the presser foot is automatically lowered
to the embroidery position and your Pfaff creative starts
embroidering. A tie-off is performed at the start of the design.
Note: Holding the reverse button for a couple of seconds will also start your embroidery.
2. A window with the following message appears: ”If you wish to
embroider without pressing the foot control, please confi rm now
with OK.“ You can also start by pressing the reverse button.
3. After a few stitches, release the foot control and cut off the thread
tail. The message window is closed.
4. Press the foot control again and touch OK during embroidering.
Your Pfaff creative 2170 will keep on embroidering. Your Pfaff
creative 2170 stops after each color segment, and the threads are
tied off and cut. A window with the following message appears:
”Change of thread, please insert the next color”.
5. Rethread your Pfaff creative 2170.
6. Press the foot control, and your Pfaff creative 2170 starts
embroidering. Tie-off is performed in the beginning of each color.
7. A window with the following message appears: "If you wish to
embroider without pressing the foot control, please confi rm now
with OK.“ You can also start by pressing the reverse button.
8. After a few stitches, release the foot control and cut off the thread
tail. The message window is closed.
9. Press the foot control again and touch OK during embroidering.
Your Pfaff creative 2170 will keep on embroidering.
Repeat the above process until all thread colors are fi nished. When
the design is fi nished, the threads are tied off and cut, the embroidery
foot raises and the machine moves to the center of the design and
comes to a standstill. The Ready message appears on the screen. If you
would like to embroider another design from the card, open the card’s
directory again by touching ESC and select a new design.
Touch Mini Main menu to return to the Main menu.
C