Pfaff 2170 - Manual (Page 46)

Sewing
3:5
F. Tie-off program
The icon for the Tie-off program includes four functions; Tie-off
beginning, Tie-off end, Thread Snips and Presser foot lifter. When
touching the icon a new window appears, making it possible for you
to select the different functions. When a function is selected the icon
becomes dark green and only the symbols for the selected functions are
visible on the icon.
If you select one of the these functions it remains active even if you
select another stitch. They will remain active until you switch off the
machine.
G. Tapering
When touching the tapering icon a new window appears. If you press
the (O) icon the seams starts at 0mm and becomes wider until the
previously selected stitch width is reached. If you press the reverse key,
the width is automatically reduced to 0mm.
If you press the (P) icon the seam starts at the full width and when
pressing the reverse button it goes down to 0mm width.
The stitch will be reduced according to the angle you have chosen (in
this case 90° or 60°).
A B
C
D
E F
G H
I J
Sewing mode functions
A. End to end mirroring
B. Side to side mirroring
C. Four directions sewing
D. Single Stitch
E. Immediate tie-off
F. Tie-off
program
G. Tapering
H. Balance
I. Free-motion
sewing
J. Twin needle
P O