Preparation, Connections and setup, 1 connections – Panasonic DP-MB350 User Manual

Page 17: Connections, 1 connections, Preparation 17

Advertising
background image

2. Preparation

17

For assistance, please contact an authorized Panasonic dealer.

2 Preparation

2For assistance, please contact an authorized Panasonic dealer.

Connections and Setup

2.1 Connections

Caution:

L

When you operate this product, the power outlet
should be near the product and easily
accessible.

Note:

L

Do not place any objects within the following
distance:

Left side (

8

): 40 cm (15

3

/

4

inches)

Right side (

9

) and back side (

j

): 10 cm (4

inches)

L

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

L

A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.

Using surge protectors

L

The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (

k

).

Using network router/network hub

L

We recommend using network routers/network hubs
(

6

) under secure network environments. Consult

your network administrator for firewall settings, etc.

L

The warranty does not cover damage due to security
problems or any inconveniences relating to it.

If the unit shares a single telephone line with a DSL
service
Fax transmission/reception may be unreliable, noise
interference may be heard during telephone
conversations, or Caller ID (page 54) may not function
properly. Please attach a DSL filter (

l

) to the telephone

line cord of the unit to prevent this. A DSL filter may be
available from your DSL service provider.

1

Power cord

L

Connect to a power outlet
(120 V, 60 Hz).

2

Telephone line cord

L

Connect to a single telephone line jack (RJ11C).

3 [

EXT

]

jack

L

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

4

Answering machine (not supplied)

5

To the Internet

6

Network router/Network hub (not supplied)

L

Also connect networked computers.

7

LAN cable (not supplied)

L

To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).

IMPORTANT NOTICE FOR THE USB
CONNECTION

L

DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 24).

5

3

9

6

2

j

8

4

7

1

k

l

Advertising