Panasonic DP-MB350 - Manual (Page 83)

11. Help
83 For assistance, please contact an authorized Panasonic dealer.
“ Fax in Memory ” L The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
104.
L If the PC fax setting (feature #442 on page 65) is set to “ Always ”,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
L If the fax preview mode (feature #448 on page 52) is set to “ On ”,
– view, print or save the received fax documents (page 48, 49, 52), and
then erase the unnecessary documents (page 49).
– turn the setting to “ Off ”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 65) to “ On ”, and then print the received fax
documents (page 49).
“ File Size Over ” L When performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“ Keep Copying ” L Copying has stopped due to some existing problem (Example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“ Left Cover Open ” L The left cover is open. Close it.
“ Low Temperature ” L The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
“ Memory Full ” L When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L When making a copy, the document being stored exceeded the memory
capacity of the unit. Press
{ Stop } to clear the message. Divide the
document into sections.
“ Memory Overflow ” L When printing a file, the document being stored exceeded the memory
capacity of the unit. Press
{ Stop } to clear the message. Change the printer
settings (page 28).
“ Modem Error ” L There is something wrong with the unit’s modem. Contact our service
personnel.
“ No Fax Reply ” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“ Out of Paper Input Tray
#1 ”
L Recording paper is not loaded or the paper input tray has run out of paper.
Load paper (page 14).
L Recording paper was not fed into the unit properly. Load the paper again
(page 14).
Note:
L “ #1 ”: Standard input tray
L “ #2 ”: Lower input tray
L “ #1+#2 ”: Standard input tray and lower input tray
“ Paper Jammed ” L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 94).
“ PC Fail or Busy. ” L The cable or the computer power cord is not connected correctly. Check the
connections (page 17, 25).
L The software is not running on the computer. Restart the software and try
again.
“ Please Wait ” L The unit is warming up. Wait for a while.
Display Cause & Solution