Programmable features 64 – Panasonic DP-MB350 User Manual
Page 64
9. Programmable Features
64
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{
4
}{
3
}{
1
}
{
1
}
“
A
”
{
2
}
“
B
”
{
3
}
“
C
”
{
4
}
“
D
”
{
5
}
“
B-D
” (default)
See page 56 for details.
Setting auto reduction
feature
{#}{
4
}{
3
}{
2
}
To receive a fax document that is longer than your recording paper.
{
0
}
“
Off
”: The unit will print received documents at their original size.
{
1
}
“
On
” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{
4
}{
3
}{
4
}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L
The fax activation code must be different from the code that you
programmed on the answering machine.
{
0
}
“
Off
”
{
1
}
“
On
” (default)
1.
{
Menu
}
i
{#}{
4
}{
3
}{
4
}
2. Press
{
1
}
to select “
On
”.
i
{
Set
}
3. Enter your code from 2 to 4 digits, using 0–9,
{*}
and
{#}
.
L
The default code is “
;#9
”.
L
Do not enter “0000”.
4.
{
Set
}
i
{
Menu
}
Setting the memory reception
alert
{#}{
4
}{
3
}{
7
}
To alert you with a beeping sound when a received fax document is stored into
memory.
{
0
}
“
Off
”: Deactivates this feature.
{
1
}
“
On
” (default): You will hear a beeping sound.
Note:
L
If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If an error message is
displayed, see page 82 to page 84 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
L
If documents are stored into memory due to activating the web fax preview
(feature #448 on page 52), the unit will not beep. However, the unit will start
to beep when the memory is nearly full.
Setting friendly reception
{#}{
4
}{
3
}{
8
}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{
0
}
“
Off
”: You have to press
{
Start
}
for fax reception.
{
1
}
“
On
” (default): You do not have to press
{
Start
}
for fax reception.
Setting the paper input tray to
use for printing received
faxes
{#}{
4
}{
4
}{
0
}
This feature will be displayed only when the lower input tray is installed (page
79).
{
1
}
“
#1
”: Standard input tray
{
2
}
“
#2
”: Lower input tray
{
3
}
“
Auto
” (default): The unit will automatically select the standard input tray or
the lower input tray according to the paper size of the received faxes.
Note:
L
To select “
#2
”, select “
Plain Paper
” or “
Thin Paper
” for the recording
paper type setting (feature #383 on page 60).
L
Even if you select “
Auto
”, recording paper will always be fed from the
standard input tray if “
Thick Paper
” is selected for the recording paper
type setting (feature #383 on page 60).
Feature/Code
Selection