5 pc print features, Pc print features, 5 pc print features – Panasonic DP-MB350 User Manual
Page 69: Programmable features 69
9. Programmable Features
69
9.5 PC print features
Feature/Code
Selection
Setting the paper input tray in
PCL
{#}{
7
}{
6
}{
0
}
This feature will be displayed only when the lower input tray is installed (page
79).
{
1
}
“
#1
” (default): Standard input tray
{
2
}
“
#2
”: Lower input tray
{
3
}
“
#1+#2
”
Note:
L
To select “
#2
”, select “
Plain Paper
” or “
Thin Paper
” for the recording
paper type setting (feature #383 on page 60).
L
To select “
#1+#2
”,
–
select the same paper size for the standard input tray (feature #380 on
page 59) and lower input tray (feature #382 on page 59). If either is
changed, “
#1
” will be selected automatically.
–
select “
Plain Paper
” or “
Thin Paper
” for the recording paper type
setting (feature #383 on page 60).
Setting the number of copies
in PCL
{#}{
7
}{
6
}{
2
}
1.
{
Menu
}
i
{#}{
7
}{
6
}{
2
}
i
{
Set
}
2. Enter the number of copies from “
001
” to “
999
”, using the dial keypad.
L
The default setting is “
001
”.
3.
{
Set
}
i
{
Menu
}
Setting the recording paper
size in PCL
{#}{
7
}{
6
}{
3
}
{
1
}
“
Letter
” (default): Letter-size paper
{
2
}
“
A4
”: A4-size paper
{
3
}
“
Legal
”: Legal-size paper
Setting the image reduction
feature in PCL
{#}{
7
}{
6
}{
4
}
{
0
}
“
Off
”: Deactivates this feature.
{
1
}
“
On
” (default): The document resolution will be automatically reduced
when the data size is too large to print.
Note:
L
This feature may lower the print quality by reducing the resolution.
Setting the recording paper
direction in PCL
{#}{
7
}{
6
}{
5
}
{
1
}
“
Portrait
” (default): The document will be printed in portrait direction.
{
2
}
“
Landscape
”: The document will be printed in landscape direction.
Setting the A4 wide feature in
PCL
{#}{
7
}{
6
}{
6
}
You can change the margin and printable area of A4-size recording paper so
that 80 characters in 10 cpi font may be printed on a line.
{
0
}
“
Off
” (default): Deactivates this feature.
{
1
}
“
On
”: The margin and printable area of A4 recording paper will be changed.
Setting the lines per page in
PCL
{#}{
7
}{
6
}{
7
}
To set the number of lines per page in PCL printing.
1.
{
Menu
}
i
{#}{
7
}{
6
}{
7
}
i
{
Set
}
2. Enter the number of lines per page from “
005
” to “
128
”, using the dial
keypad.
L
The default setting is “
060
”.
3.
{
Set
}
i
{
Menu
}
Setting the font source in PCL
{#}{
7
}{
6
}{
8
}
This feature is available when the downloaded font is registered to the unit.
{
1
}
“
Resident
” (default): The document will be printed using resident font.
{
2
}
“
Download Font
”: The document will be printed using download font.