Copier 40, 4 poster feature (scanner glass only), 5 n in 1 feature – Panasonic DP-MB350 User Manual
Page 40
5. Copier
40
L
Other copy settings are also available. See page
36 for details.
7
Quick ID copy feature:
1.
{
Start
}
L
The unit will scan 1 page.
2. Place the next document on the scanner glass
and press
{
Set
}
. Repeat this until all the
documents are scanned.
L
The unit will start copying.
L
You can press
{
Start
}
anytime to start
copying.
Easy repeat feature:
{
Start
}
8
After you finish copying, press
{
Stop
}
to reset this
feature.
Note:
L
You can save the previous page layout setting
(feature #467 on page 67).
5.2.4 Poster feature (Scanner glass only)
You can make copies divided into 4 (“
2
×2
”) or 9 (“
3
×3
”)
sections to make enlarged copies of the individual
sections. You can then glue them together to make a
poster.
1
Set the original (page 19).
2
Press
{V}
or
{^}
repeatedly to select “
Page
Layout
”.
i
{<}
/
{>}
3
Press
{V}
or
{^}
repeatedly to select “
Poster
”.
i
{
Set
}
4
Press
{V}
or
{^}
repeatedly to select “
2
×2
” or
“
3
×3
”.
i
{
Set
}
5
If necessary, enter the number of copies (page 36).
L
Other copy settings are also available. See page
36 for details.
6
{
Start
}
7
After you finish copying, press
{
Stop
}
to reset this
feature.
Note:
L
You can save the previous page layout setting
(feature #467 on page 67).
5.2.5 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1
Set the original (page 19).
L
To make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2
Press
{V}
or
{^}
repeatedly to select “
Page
Layout
”.
i
{<}
/
{>}
3
Press
{V}
or
{^}
repeatedly to select “
N in 1
”.
i
{
Set
}
4
Press
{V}
or
{^}
repeatedly to select the desired
page layout.
–
“
2 in 1 (Portrait)
”
–
“
2 in 1 (Landscape)
”
–
“
4 in 1 (Portrait)
”
–
“
4 in 1 (Landscape)
”
–
“
8 in 1 (Portrait)
”
–
“
8 in 1 (Landscape)
”
5
{
Set
}
6
If necessary, enter the number of copies (page 36).
L
Other copy settings are also available. See page
36 for details.
7
When using the scanner glass:
1.
{
Start
}
L
The unit will scan 1 page.
2. Place the next document on the scanner glass
and press
{
Set
}
. Repeat this until all the
documents are scanned.
L
The unit will start copying.
L
You can press
{
Start
}
anytime to start
copying.
When using the automatic document feeder:
{
Start
}
8
After you finish copying, press
{
Stop
}
to reset this
feature.
Note:
L
You can save the previous page layout setting
(feature #467 on page 67).
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the “
2 in 1
” and “
4 in 1
”
settings.
1. Set the original (page 19).
2. Press
{V}
or
{^}
repeatedly to select “
Page
Layout
”.
i
{<}
/
{>}
3. Press
{V}
or
{^}
repeatedly to select “
Separate N
in 1
”.
i
{
Set
}
4. Press
{V}
or
{^}
repeatedly to select the desired
page layout.
–
“
2 in 1 (Portrait)
”
–
“
2 in 1 (Landscape)
”
–
“
4 in 1 (Portrait)
”
–
“
4 in 1 (Landscape)
”
5.
{
Set
}
6. If necessary, enter the number of copies (page 36).
L
Other copy settings are also available. See page
36 for details.
7.
{
Start
}