Panasonic DP-MB350 - Manual (Page 46)

6. Fax
46
L To add other items, repeat this step (up to 20
items).
6
{ Back } i { Menu }
6.4.3 Erasing a stored item from the
broadcast memory
1
{ Menu }
2 Press {V} or {^} repeatedly to select “ Directory
Set ”.
3 Press {<} or {>} repeatedly to select
“ Broadcast ”. i { Set }
4 Press {V} or {^} repeatedly to select the desired
broadcast memory location (“ <Broadcast1> ” to
“ <Broadcast5> ”). i {<} / {>}
L If you changed the broadcast memory name
when programming, select that name.
5 Press {V} , {^} , {<} or {>} repeatedly to select the
item that you want to erase.
L To cancel erasing, press { Stop } , then press
{ Menu } .
6 {#} i { Menu }
Note:
L If you erase all programmed items, the broadcast
memory name will return to the default name.
6.4.4 Sending the same document to pre-
programmed parties
L Make sure that the { Fax } light is ON.
To send the same document using the scanner glass
1. Set the original (page 19).
2. Press {<} or {>} to initiate the navigator directory.
3. Press {V} or {^} repeatedly to select the desired
broadcast memory location. i { Set }
4. If necessary, change the resolution (page 42) and
the contrast (page 42). i { Start }
L To send a single page, go to step 6.
L To send multiple pages, go to the next step.
5. Place the next page. i { Set }
L To send more pages, repeat this step.
6. { Start }
Note:
L To stop sending, see page 78.
L If you select “ Fine ”, “ Super Fine ” or “ Photo ”
resolution, the number of pages that the unit can
send will decrease.
L If the document exceeds the memory capacity,
sending will be canceled.
L If a party is busy or does not answer, it will be skipped
and redialed later 1 time.
L After transmission, the unit will automatically print a
report (broadcast sending report).
To send the same document using the automatic
document feeder
1. Set the original (page 20).
2. Press {<} or {>} to initiate the navigator directory.
3. Press {V} or {^} repeatedly to select the desired
broadcast memory location. i { Set }
4. If necessary, change the resolution (page 42) and
the contrast (page 42).
5. { Start }