Powerware 9 - Manual (Page 55)

Communication
49 Powerware ® 9 Prestige Series User’s Guide (600 VA - 1800 VA)
:
www.powerware.com
8h‡hy‚t Æ) 9 $ ! !$!
Ir 8PHH) 6T8DD
Q r†† †ƒhpr ih ‡‚ p‚‡vˆr
Tr vhy Æ)
Wr †v‚ Æ)
8PHH €‚qr)
7hˆq ‘ )
G6I €‚qr)
7F"("7!&#
!
Tr fQ v‡
!#
I‚‰ryy
Ir 7hˆq)
Ir G6I)
(%
I‚‰ryy
Tv‡r Ahˆy‡ 9r‡rp‡v‚) @hiyrq
NOTE Catalog #, Serial #, and Version # are all identification numbers unique to your
UPS and can also be found on the UPS nameplate.
1 > Continuous Dump The UPS regularly transmits status
information to the computer. Baud rates of 1200 to 2400 are
recommended to reduce host computer overhead when using
this mode.
2 > Polled Dump Status information is transmitted only when
requested by a poll character (Control-E).
3 > Smart Dump Status information is transmitted when polled, as
in the previous mode. However, the transmission also occurs
automatically whenever UPS status changes. For example, if
there is a power outage, UPS status information changes and is
therefore, automatically transmitted.
A > ASCII Terminal The UPS displays the formatted data on the
attached video terminal.
B > VT100 Terminal The UPS displays the formatted data on the
attached video terminal.
P > Printer Dump The UPS prints the formatted data on the
attached printer.
L > LAN Configuration allows you to configure the UPS for a new
LAN mode and displays the Select LAN Configuration Menu.