Powerware 9 - Manual (Page 63)

57 Powerware ® 9 Prestige Series User’s Guide (600 VA - 1800 VA)
:
www.powerware.com
C H A P T E R 7
T
ROUBLESHOOTING
The Prestige UPS is designed for durable, automatic operation and also
alerts you whenever potential operating problems may occur. Use the
following troubleshooting chart to determine the UPS alarm condition.
Unlit
Amber
Green
Flashing
Indicator Legend
Condition Possible Cause Action
UPS does not turn on. UPS is not plugged in. Plug UPS into working outlet.
Dead wall socket. Test wall socket, repair as required.
UPS circuit breaker is tripped. Reduce load, then reset breaker. If you are
using a PowerPass, reset the breaker using
a pencil through the circuit breaker (CB1)
access hole.
PowerPass circuit breaker is
tripped. Reset breaker.
Load does not turn on. UPS has not been activated. Press the Output
|
On button for one
second, then release.
UPS beeps occasionally. Normal operation. None. UPS is protecting your equipment.
UPS circuit breaker trips. Load fault. Check the load.
Disconnect faulty load equipment.
Wait several minutes before resetting the
UPS circuit breaker. If you are using a
PowerPass, reset the breaker using a
pencil through the circuit breaker (CB1)
access hole.
Restart the load.